This is our SFW Universal Tranny/Transfer Case Mount. It is designed for mounting a tranny or transfer case too 1.75" tube crossmember. The features of the SFW Universal Tranny/Transfer Case Mount are as follows:

• CNC cut and formed from 3/16" A50 Plate Steel
• Part comes un-painted and requires welding
• SFW recommends having it welded by a qualified welder
• Use the two slotted holes for mounting transfer case (Atlas, Doubler, Etc.) OR use the two round holes for mounting tranny.
• This little bracket makes mounting your tranny OR transfer case simple and quick.
• Welding surface includes around the tube at each side of bracket and along the tab across the top of the tube.
• Designed to be mounted to 1.75" tube but can easily be modified to mount to larger diameter tube or even square tube.
• Can be used with common after-market tranny mounts between the bracket and tranny.
• This bracket is wide enough to mount the Atlas mounting leg down inside this bracket or situated on top like it is setup in the pictures.
• This bracket mounts either the tranny or transfer case but not both on one bracket. If you are one of those individuals that likes to have both the tranny and transfer case mounted to your crossmember, then you will need two of these brackets.

Price includes one un-welded/un-painted bracket. Installation requires welding. Tubing in picture is for reference only and does not come with this purchase.